Sunlight-readable HMI displays for indoor, outdoor as text and graphics, bright and rich in contrast.
Sunlight readable HMI displays: Two different technologies allow the sunlight readability of a HMI display:
The use of a transflective polarizer allows the display background to be brightened by sunlight (similar to a mirror). Transflective displays, i.e. sunlight readable, can be found in the EA DOG series, in the EA DIP Displays and in the EA eDIP series (linked here)
This technique is extremely expensive for colored displays. Therefore, an extremely bright backlight is constructed to enable reading even in sunlight. Sunlight-readable HMI displays require a brightness of at least 1000 cd / m². For example, our EA uniTFTs series is definitely sunlight readable.
If a device is installed outdoors (outdoor) or is to be read there as a handheld device, it is essential to ensure that it is legible in sunlight. Reading or readability in the direct sun depends on many parameters. Our EA uniTFTs series for example is definitely sunlight readable.
If a device is installed outdoors (sunlight) or is to be read as a handheld device, sunlight readability must be considered. Reading or readability in direct sunlight depends on many parameters. Let us advise you: email
In contrast to many other manufacturers, you can also buy only 1 piece from us: Link to the webshop